DFI today launches the Mini-ITX form factor HR100-CRM mobile platform offering higher processing performance, superior graphics display support, and evolutionary memory system and I/O interface improvements. This embedded board uses an Intel QM67 Express chipset supporting the quad core 2nd Generation Intel Core i7-2710QE processor and dual core 2nd Generation Intel Core i5-2510E processor on 32nm process technology. The graphics and processor cores are integrated on a single monolithic die and provide Intel HD graphics support for DVI-I, LVDS and VGA display interfaces. The 32nm Intel micro architecture provides higher performance at lower power than previous generation processors, and includes the first mobile quad-core processor with an integrated graphics core. Performance is further increased through the introduction of Intel Advanced Vector Extensions (Intel AVX) to the instruction set, providing acceleration of complex audio, video, and image processing.
In addition, this new platform supports Intel Hyper-Threading Technology and improved Intel Turbo Boost Technology 2.0, which enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel Hyper-Threading Technology, Intel Turbo Boost Technology improvements, and the new three-level cache subsystem insures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.
Support is provided for up to 8GB of DDR3 1066/1333 MHz dual-channel system memory, two Gigabit LAN controllers, Intel vPro technology (including Intel Active Management Technology 7.0, Intel Virtualization Technology, and Intel Trusted Execution Technology), and optional Trusted Platform Module (TPM 1.2). The integrated Intel HD graphics engine supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel Clear Video Technology providing advanced imaging capability for Blu Ray and other high definition video processing. The onboard DVI, VGA, and LVDS interfaces support dual independent display operation.
The HR100-CRM also supports Intel High Definition A udio with S/PDIF input/output interface, two Serial ATA ports with speed up to 3Gb/s, two Serial ATA ports with speed up to 6Gb/s, RAID 0, 1, 5, 10 disk configuration, eight USB 2.0 host controller ports, and one PCI Express x16 expansion slot (Gen 2).
This embedded Mini-ITX board is ideal for applications requiring a stable revision-controlled platform such as industrial control automation, digital signage, kiosk, medical equipment, and gaming embedded applications.
HR100-CRM Features:
• Mini-ITX form factor (170mm x 170mm)
• Supports 2nd Generation Intel Core i7-2710QE i5-2510E processors
• Supports Intel vPro Technology features (Intel Active Management Technology 7.0,
Intel Virtualization Technology, and Intel Trusted ExecutionTechnology)
• Trusted Platform Module (TPM 1.2) option
• Up to 8GB of DDR3 1066/1333 MHz dual-channel memory
• DVI and VGA display interfaces
• 2 Gigabit Ethernet LAN ports
• 2 SATA ports (3Gb/s)
• 2 SATA ports (6Gb/s)
• 8 USB ports
• 6 Serial COM ports (2 RS-232/422/484)
• 1 PCI Express x16 expansion slot (Gen 2)
• Operating Temperature Range 0°C to 60°C
All product specifications are subject to change without notice.
Intel and Atom are registered trademarks of the Intel Corporation in the U.S. and other countries.
For more information, please call DFI sales or send us an email: inquiry@dfi.com
For more information on the HR100-CRM Mini-ITX motherboard, please visit: www.dfi.com
About DFI
Established in 1981, DFI is a leading supplier of high-performance computing technology worldwide. With more than 29 years of experience, DFI focuses on innovative design and manufacture of leading-edge board and system level products for embedded applications requiring strict revision control and long life availability. DFI uses the latest technology platforms and manufacturing techniques to produce cost-effective products for use in medical diagnostic & imaging, ATM/POS, industrial control, kiosk, security & surveillance, digital signage, gaming, and other embedded applications. As an Associate member of the Intel Embedded Alliance (IEA), DFI works closely with Intel on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.
DFI Inc.
100, Huanhe St., Xizhi Dist.,
New Taipei City 22154, Taiwan (R.O.C.)
Tel: +886 (2) 2694-2986
Fax: +886 (2) 2694-5815
Sales E-Mail: inquiry@dfi.com
Website: https://www.dfi.com