DFI today launches the microATX form factor SB330-CRM scalable desktop platform offering higher processing performance, superior graphics display support, and evolutionary memory system and I/O interface improvements. This embedded board uses an Intel Q67 chipset supporting the quad core Intel Core i7-2600 and i5-2400 processors, and dual core Intel Core i3-2120 processor utilizing 32-nanometer process technology. The graphics and processor cores are integrated on a single monolithic die and provide Intel HD graphics support for DVI-I and VGA display interfaces. The new 32-nanometer Intel Core microarchitecture provides higher performance at lower power than previous generation processors, and includes the first quad-core Intel processor with an integrated graphics core. Performance is further increased through the introduction of Intel Advanced Vector Extensions (Intel AVX) to the instruction set, providing acceleration of complex audio, video, and image processing.
In addition, this new platform supports Intel Hyper-Threading Technology and improved Intel Turbo Boost Technology 2.0, which enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel Hyper-Threading Technology, improvements in Intel Turbo Boost Technology, and the new three-level cache subsystem insures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.
Support is provided for up to 32GB of DDR3 1066/1333 MHz dual-channel system memory, two Gigabit LAN controllers, DVI and VGA display interfaces, Intel vPro Technology features (Intel Active Management Technology 7.0, Intel Virtualization Technology, and Intel Trusted Execution Technology), as well as optional Trusted Platform Module (TPM 1.2). The integrated Intel HD graphics engine supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel Clear Video Technology providing advanced imaging capability for Blu Ray and other high definition video processing.
The SB330-CRM also supports Intel HD audio with S/PDIF input/output interface, four Serial ATA ports with speed up to 3Gb/s, two Serial ATA ports with speed up to 6Gb/s, RAID 0, 1, 5, 10 disk configuration, twelve USB 2.0 host controller ports, and one PCI Express x16 expansion slot (Gen 2), one PCI Express x4 expansion slot, and one PCI expansion slot.
This embedded microATX board is ideal for applications requiring a stable revision-controlled platform such as industrial control automation, digital signage, kiosk, medical equipment, telecom, and gaming embedded applications.
• microATX form factor, 244mm x 244mm
• Supports Intel Core i7-2600, i5-2400, and i3-2120 processors
• Intel Q67 chipset
• Supports Intel vPro Technology
• Trusted Platform Module (TPM 1.2) option
• Up to 32GB of DDR3 1066/1333 MHz dual-channel memory
• DVI and VGA display interfaces
• 2 Gigabit Ethernet LAN ports
• 4 SATA ports (3Gb/s)
• 2 SATA ports (6Gb/s)
• 12 USB ports
• 6 Serial COM ports (2 RS-232/422/484)
• 1 PCI Express x16 expansion slot (Gen 2)
• 1 PCI Express x4 expansion slot
• 2 PCI expansion slots
• Operating Temperature Range: 0°C ~ 60°C
All product specifications are subject to change without notice.
Intel and Atom are registered trademarks of the Intel Corporation in the U.S. and other countries.
For more information, please call DFI sales or send us an email: email@example.com
For more information on the SB330-CRM, please visit: www.dfi.com
Established in 1981, DFI is a leading supplier of high-performance computing technology worldwide. With more than 29 years of experience, DFI focuses on innovative design and manufacture of leading-edge board and system level products for embedded applications requiring strict revision control and long life availability. DFI uses the latest technology platforms and manufacturing techniques to produce cost-effective products for use in medical diagnostic & imaging, ATM/POS, industrial control, kiosk, security & surveillance, digital signage, gaming, and other embedded applications. As an Associate member of the Intel Embedded Alliance (IEA), DFI works closely with Intel on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.
100, Huanhe St., Xizhi Dist.,
New Taipei City 22154, Taiwan (R.O.C.)
Tel: +886 (2) 2694-2986
Fax: +886 (2) 2694-5815
Sales E-Mail: firstname.lastname@example.org